Aanraku TORTOISE Sterling Silver Plated LARGE Ten Pieces Fusing Supplies Glue On
These quality silver plated jewelry bails measure 25mm long and 7mm wide. The inside diameter of the bail is about 7mm by 4mm and will accommodate most necklaces; chains and cords. The gluing area (pad) measures about 12mm by 8mm. Sold in packages of ten.
Glue cabochons to jewelry bails with a small amount of E6000 or Triolyse Glue. For best results, run a very thin bead of adhesive around the outside flat perimeter of the bail, this allows air in the center to properly cure the adhesive. Place the bail on the cabochon and squeeze together for approximately 15 seconds.
We Also Recommend