1
/
of
3
Two Gnome Ornaments Glass Casting Mold Ceramic Little Fritter CPI LF240
Two Gnome Ornaments Glass Casting Mold Ceramic Little Fritter CPI LF240
Regular price
$ 39.59 USD
Regular price
$ 44.00 USD
Sale price
$ 39.59 USD
Unit price
/
per
Shipping calculated at checkout.
Low stock: 1 left
Couldn't load pickup availability
You are purchasing a mold, not a finished product.
This is a quality ceramic mold from Creative Paradise (CPI). With proper use, this mold will last through many firings.
LF240 Two Small Gnome Ornaments
Mold Size: 8" L x 5.5" W x 1.5" T
Casting Size: 6" L x 1.75" W each
Fill Weight: 70 grams per cavity
Please visit here for a general tutorial on frit casting and using molds with posts. https://www.creativeparadiseglass.com/v/vspfiles/tutorialsfornewweb/BasicFritCastTutorial.pdf
Refer to the table below for a suggested Full Fuse schedule for COE96 glass:
Segment Rate Temp (F) Hold
1 300 1150 45
2 150 1300 20
3 400 1460 10
4 9999 950* 60
*If using COE90, adjust this temperature to 900
Refer to the table below for a suggested Tack Fire schedule for COE96 glass:
(If fusing to a Tack Fire, we recommend using Powder and Fine frit, and filling uniformly 1/4" full)
Segment Rate Temp (F) Hold
1 300 1150 45
2 150 1300 20
3 400 1410 10
4 9999 950* 60
*If using COE90, adjust this temperature to 900
For best results, use ZYP mold release spraying from several angles to make sure you coat every detail in the mold.
Perfect for small kilns, but make sure you measure your kiln before ordering.
Not for use in microwave kilns. For standard, electric glass kilns only.
This is a quality ceramic mold from Creative Paradise (CPI). With proper use, this mold will last through many firings.
LF240 Two Small Gnome Ornaments
Mold Size: 8" L x 5.5" W x 1.5" T
Casting Size: 6" L x 1.75" W each
Fill Weight: 70 grams per cavity
Please visit here for a general tutorial on frit casting and using molds with posts. https://www.creativeparadiseglass.com/v/vspfiles/tutorialsfornewweb/BasicFritCastTutorial.pdf
Refer to the table below for a suggested Full Fuse schedule for COE96 glass:
Segment Rate Temp (F) Hold
1 300 1150 45
2 150 1300 20
3 400 1460 10
4 9999 950* 60
*If using COE90, adjust this temperature to 900
Refer to the table below for a suggested Tack Fire schedule for COE96 glass:
(If fusing to a Tack Fire, we recommend using Powder and Fine frit, and filling uniformly 1/4" full)
Segment Rate Temp (F) Hold
1 300 1150 45
2 150 1300 20
3 400 1410 10
4 9999 950* 60
*If using COE90, adjust this temperature to 900
For best results, use ZYP mold release spraying from several angles to make sure you coat every detail in the mold.
Perfect for small kilns, but make sure you measure your kiln before ordering.
Not for use in microwave kilns. For standard, electric glass kilns only.
Share


