Two Precut Fusible Glass Hangers 96 COE Clear 1x1 inch

These handy hangers fuse right into your project. 

They're easy to use. Just add a little bit of glue to the edge and butt up to your glass. Both must be flat. Fuse as you normally would.

In the illustration, I used two layers of hangers because my project was two layers. 

These would be very difficult to cut by hand. We'll do the cutting. You make the art!

Quantity: Two pieces

Manufacturer: Glass by Oceanside Glass & Tile Icicle Clear

Measurements: Squares are 1x1 inch. The inside circle is 1/2 inch. 

Need more than I have listed? Let me know. If I can, I'll cut to order. 

Expect some minor edge chipping as these are water jet cut using crushed garnet abrasive.

Sizes can vary very slightly due to the nature of the glass being cut. 

Made by Rocky Mountain Glass Crafts in Loveland, Colorado

Safety first! Please view the safety data sheets for Oceanside products here: https://oceansidecompatible.com/pages/sds-page

⚠ WARNING: This product can expose you to chemicals including lead and/or cadmium, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.